Around the beginning of October 2015 I’ve got an oportunity to go for a synthmeet to show my new SDSV modules. The problem was I got no PSU or a modular case. I had only a week to DIY something and started with very simple mini PSU project, based on Doepfers A-100 MNT. As I […]
One day I decided to move my modular drum synth into bigger case. The main reason was my girlfriend wanted to use my previous Ikea Rast style case as an balcony table. I had no choice. The plans The design is based on Doepfers A-100 Low Cost 9U case. I made few “improvements” to […]
Some eurorack modules still use +5 V voltage busboard rail. If your PSU doesn’t supply it, you need to get a 5 V adapter (or get a new PSU). Doepfer “low cost” adapter costs around 15 euro. My alternative is much cheaper – project is very simple and all parts costs about 1 euro (but […]
There is no modular synth without busboards. My design is based on Doepfers A100-BUS. It is simple, cheap easy to make. Same as Doepfer, mine has CV and GATE buses – thus 16 pin power connector. Schematic is very simple, but you have to do it before PCB design. Nothing fancy here, 14 2×8 pin […]
